Hanging Kit
Part Number
KSAHM01
Weight
0.37 lb / 0.17kg
Dimensions
L 118" / L 299.7cm (Unit x2)
Separator
Product Information
Overview
The Hanging Kit allows the AP9 to be hung from your ceiling or even within your canopy. The Hanging Kit comes with two 118" long hanging cables, two toggle bolts, and two tapping screws, allowing the users to hang the AP9 at adjustable height. Our recommendation is to hang the AP9 15" - 18" above water surface to obtain a 48"x24" coverage for mixed reef tank, and 5" - 7" above water surface for a 36"x24" coverage for SPS dominant tank.
Separator
What's in the Box
Toggle Bolts (x2)
Tapping Screws (x2)
Hanging Cable (x2)
Separator
Compatible with
AP9X
Separator
Toggle Bolt Installation
1.1
Remove the (A) screws from the toggle bolts.
1.2
Loosen the top part of the hanging cable (C) and put the (A) screws in.
2.1
Screw the toggle bolts into the hanging cable (C).
2.2
Squeeze the sides of the toggle bolt (A), then insert into a pre-drilled hole.
*Hole Size - Min: 5/8"(16mm) / Max: 1"(25mm)
Tapping Screws Installation
1
Loosen the top part of the hanging cable (C)
2
Screw the (B) screws in the wall tightly.
3
Remove the four corner screws from the AP700 using the hex wrench.
4
Screw the hanging cable (C) into the corners of the AP700. You are finished!
Separator