LED Refugium Light
We recommend mounting Kessil lights 8-12 inches above the water surface for the ideal coverage.
All Kessil aquarium lights are compatible with the A Series Gooseneck. The base of the gooseneck features a clamp that can be mounted onto glass or acrylic tanks and is also compatible with euro brace styles.
The light attaches onto the gooseneck via a bracket. There are three variations of the bracket, one for the A150 line, one for the A350 and A360 line, and a third for the A160 line.
The gooseneck package includes the A350/A360 bracket. The A150 and A160 brackets are included with the light.
The 90 Degree Gooseneck Adaptor can be used to extend the reach of the gooseneck.
Insert plastic stepper into gooseneck base and secure with plastic screws.
Place gooseneck base onto aquarium.
Screw thumb screws into gooseneck base to secure the base to aquarium.
Screw gooseneck into the gooseneck base.
Rotate the gooseneck base so that the clamp lies horizontally, with the side with 3 holes facing up. Follow the above steps for gooseneck mounting.
Remove and reserve screws for step B2.
Secure designated bracket to unit with screws from step B1.
Screw gooseneck to attach the bracket.
Connect the power supply and adjust gooseneck.
The A350 and A360 have a removable hanging bolt, which can be used to hang from the ceiling using cables or wires. The A150 and A160 have two triangle clips on each fixture, which can also be used to hang the lights from.
It is also possible to mount the lights inside a canopy. Be sure to allow enough room for ventilation or the fixtures may overheat and become damaged.