- Extension Mount
No. of Extension Mount Sets Required
Extension Mount Install Instructions
Insert Arm and Extension Tube(I) into Coupling(II) until they meet the slot opening. Use two M5 Thumb screws(IV) to secure both tubes.
*Mounting Arm needs to be purchased separately.
Insert both Extension Tubes(I) into Coupling(II) until they meet the slot opening. Use two M5 screws(IV) to secure both tubes.
Longer extension requires 2 sets of Extension Mounts for AP700 setup.
Use four M4 Phillips Wood screws(III) to secure the Tube Adapter on wood stand. Put Extension Tube(I) into the Tube Adapter. Secure them with two M5 Thumb screws.
*Tube adapter and M5 Thumb screws are in the Mounting Arm box.
Follow steps A4 to A10 (on Mounting Arm box) to complete installation.
*Flatten the AP700 cable before fitting into the arm.
Follow steps B1 to B4 (on Mounting Arm box) to complete installation.
What's in the Box
I Extension Tube (x2)
II Coupling (pre-installed with M4 ROUND HEAD HEX SCREW, L=5mm) (x2)
III M4 phillips wood screw (x8)
IV M5 thumb screw (x4)